Simplified DNS functions (Mailfromd Manual)

5.24.2 Simplified DNS functions

These functions are implemented in two layers: primitive built-in functions which raise exceptions if the lookup fails, and library calls that are warranted to always return meaningful value without throwing exceptions.

The built-in layer is always available. The library calls become available after requesting the dns module (see Modules):

require dns

Library Function: string dns_getaddr (string domain) ¶: Returns a whitespace-separated list of IP addresses (A records) for domain.

Library Function: string dns_getname (string ipstr) ¶: Returns a whitespace-separated list of domain names (PTR records) for the IPv4 address ipstr.

Library Function: string getmx (string domain [, boolean ip]) ¶

Returns a whitespace-separated list of ‘MX’ names (if ip is not given or if it is 0) or ‘MX’ IP addresses (if ip!=0)) for domain. Within the returned string, items are sorted in order of increasing ‘MX’ priority. If domain has no ‘MX’ records, an empty string is returned. If the DNS query fails, getmx raises an appropriate exception.

Examples:

getmx("mafra.cz") ⇒ "smtp1.mafra.cz smtp2.mafra.cz relay.iol.cz"
getmx("idnes.cz") ⇒ "smtp1.mafra.cz smtp2.mafra.cz relay.iol.cz"
getmx("gnu.org")  ⇒ "mx10.gnu.org mx20.gnu.org"
getmx("org.pl") ⇒ ""

Notes:

Number of items returned by getmx(domain) can differ from that obtained from getmx(domain, 1), e.g.:

getmx("aol.com")
  ⇒ mailin-01.mx.aol.com mailin-02.mx.aol.com
            mailin-03.mx.aol.com mailin-04.mx.aol.com
getmx("aol.com", 1)
  ⇒ 64.12.137.89 64.12.137.168 64.12.137.184
            64.12.137.249 64.12.138.57 64.12.138.88
            64.12.138.120 64.12.138.185 205.188.155.89
            205.188.156.185 205.188.156.249 205.188.157.25
            205.188.157.217 205.188.158.121 205.188.159.57
            205.188.159.217

This function is a wrapper over dns_query.

If you intend to iterate over returned values, better use dns_query directly, e.g. instead of doing

string_list_iterate(getmx(domain), ` ', MX, `do_something(MX)')

use

  set n dns_query(DNS_TYPE_MX, domain)
  if n >= 0
    loop for set i 0,
         while i < dns_reply_count(n),
         set i i + 1
    do
      do_something(dns_reply_string(n, i))
    done
    dns_reply_release(n)
  fi

See dns_query, for details about the dns_query function and associated dns_reply_* calls.

This interface is semi-deprecated.
It will most probably be removed in future releases, when array data types are implemented.

Built-in Function: boolean primitive_hasmx (string domain) ¶

Returns true if the domain name given by its argument has any ‘MX’ records.

If the DNS query fails, this function throws failure or temp_failure.

Library Function: boolean hasmx (string domain) ¶

Returns true if the domain name given by its argument has any ‘MX’ records.

Otherwise, if domain has no ‘MX’s or if the DNS query fails, hasmx returns false.

Built-in Function: string primitive_hostname (string ip) ¶

The ip argument should be a string representing an IP address in dotted-quad notation. The function returns the canonical name of the host with this IP address obtained from DNS lookup. For example

primitive_hostname (${client_addr})

returns the fully qualified domain name of the host represented by Sendmail variable ‘client_addr’.

If there is no ‘PTR’ record for ip, primitive_hostname raises the exception e_not_found.

If DNS query fails, the function raises failure or temp_failure, depending on the character of the failure.

Library Function: string hostname (string ip) ¶

The ip argument should be a string representing an IP address in dotted-quad notation. The function returns the canonical name of the host with this IP address obtained from DNS lookup.

If there is no ‘PTR’ record for ip, or if the lookup fails, the function returns ip unchanged.

The previous mailfromd versions used the following paradigm to check if an IP address resolves:

  if hostname(ip) != ip
    ...

Built-in Function: boolean primitive_ismx (string domain, string host) ¶

The domain argument is any valid domain name, the host is a host name or IP address.

The function returns true if host is one of the ‘MX’ records for the domain.

If domain has no ‘MX’ records, primitive_ismx raises exception e_not_found.

If DNS query fails, the function raises failure or temp_failure, depending on the character of the failure.

Library Function: boolean ismx (string domain, string host) ¶

The domain argument is any valid domain name, the host is a host name or IP address.

The function returns true if host is one of the ‘MX’ records for the domain. Otherwise it returns false.

If domain has no ‘MX’ records, or if the DNS query fails, the function returns false.

Built-in Function: string primitive_resolve (string host, [string domain, number family]) ¶

Reverse of primitive_hostname. The primitive_resolve function returns the IP address for the host name specified by its host argument. If the SMTP session uses IPv4 protocol, ‘A’ record is queried. It it uses IPv6, ‘AAAA’ record is queried. A particular record type can be requested via optional family, which can have one of the following values (defined in status.mfl):

RESOLVE_DFL: Look for ‘A’ or ‘AAAA’, depending on the connection type. This is the default.
RESOLVE_IP4: Resolve to IPv4 addresses (‘A’ records).
RESOLVE_IP6: Resolve to IPv6 addresses (‘AAAA’ records).

If host has no records of the requested type, the function raises the exception e_not_found.

If DNS lookup fails, the function raises failure or temp_failure, depending on the character of the failure.

Optional domain argument is deprecated. If a non-empty string is given as domain, the function works as follows:

If domain is ‘in-addr.arpa’ (case-insensitive)
The host must be a string representation of an IPv4 address in dotted-quad form. If it is not, a e_inval exception is thrown. The octets in the IPv4 are reversed, a dot and ‘domain’ are appended to it, and a ‘PTR’ record is queried for the resulting name.

Thus, the call
```
primitive_resolve("192.0.2.1", "in-addr.arpa")
```
is equivalent to
```
primitive_hostname("192.0.2.1")
```
domain is ‘ip6.arpa’ (case-insensitive)
The host must be a string representation of an IPv6. If it is not, a e_inval exception is thrown. The octets of this IPv6 address are reversed, a dot and ‘domain’ are appended to it, and a ‘PTR’ record is queried for the resulting name.

Thus, the call
```
primitive_resolve("2001:DB8::1", "ip6.arpa")
```
is equivalent to
```
primitive_hostname("2001:DB8::1")
```
host is a string representation of an IPv4 address
The address is reversed as in (1), then a dot and ‘domain’ are appended to it. Finally, the DNS is queried for an ‘A’ record of the resulting name.

Thus,
```
primitive_resolve("192.0.2.1", "rev.example.com")
```
is equivalent to
```
primitive_resolve("1.2.0.192.rev.example.com")
```
host is a string representation of an IPv6 address
The address is reversed as in (2), then a dot and ‘domain’ are appended to it. Finally, the DNS is queried for an ‘AAAA’ record of the resulting name.
None of the above. Same as primitive_hostname(‘host.domain’,'',resolve).

Library Function: string resolve (string host, [string domain, number family]) ¶

Reverse of hostname. The resolve function returns IP address for the host name specified by host argument. If the host name cannot be resolved, or a DNS failure occurs, the function returns ‘"0"’.

This function is entirely equivalent to primitive_resolve (see above), except that it never raises exceptions.

Built-in Function: string ptr_validate (string ip) ¶

Tests whether the DNS reverse-mapping for ip exists and correctly points to a domain name within a particular domain.

First, it obtains all ‘PTR’ records for ip. Then, for each record returned, a look up for ‘A’ (or ‘AAAA’, if ip is an IPv6 address) records is performed and IP addresses of each record are compared against ip. The function returns true if a matching ‘A’ (or ‘AAAA’) record is found.

This function can raise the following exceptions:

e_not_found: Unable to resolve IP address or hostname.
e_failure: Fatal error while resolving.
e_temp_failure: Temporary error in DNS resolution.
e_too_many: Too many CNAME records (see CNAME chains).

Built-in Function: boolean primitive_hasns (string domain) ¶: Returns ‘True’ if the domain domain has at least one ‘NS’ record. Throws exception if DNS lookup fails.

Library Function: boolean hasns (string domain) ¶: Returns ‘True’ if the domain domain has at least one ‘NS’ record. Returns ‘False’ if there are no ‘NS’ records or if the DNS lookup fails.

Library Function: string getns (string domain ; boolean resolve, boolean sort) ¶

Returns a whitespace-separated list of all the ‘NS’ records for the domain domain. Optional parameters resolve and sort control the formatting. If resolve is 0 (the default), the resulting string will contain IP addresses of the NS servers. If resolve is not 0, hostnames will be returned instead. If sort is 1, the returned items will be sorted.

If the DNS query fails, getns raises an appropriate exception.

Notes:

This function is a wrapper over dns_query.

If you intend to iterate over returned values, better use dns_query directly, e.g. instead of doing

string_list_iterate(getns(domain), ` ', NS, `do_something(NS)')

use

  set n dns_query(DNS_TYPE_NS, domain)
  if n >= 0
    loop for set i 0,
         while i < dns_reply_count(n),
         set i i + 1
    do
      do_something(dns_reply_string(n, i))
    done
    dns_reply_release(n)
  fi

See dns_query, for details about the dns_query function and associated dns_reply_* calls.

This interface is semi-deprecated.
It will most probably be removed in future releases, when array data types are implemented.